Description

Kentec Syncro AS Installation Manual

The Syncro AS Installation Manual is the engineer-facing wiring and physical installation reference for the Kentec Syncro AS addressable fire alarm platform. It covers cabinet mounting through to power-on and initial loop discovery.

What the manual covers

• Cabinet mounting, AC mains wiring, earthing
• Battery sizing for 24h standby + 30 min alarm
• Loop topology: 2-wire addressable with line isolators
• Apollo XP95 and Apollo Discovery device wiring
• Hochiki ESP device wiring
• Multi-protocol loop configurations (Apollo + Hochiki on the same loop)
• Sounder circuit wiring including loop-powered sounders
• K-BUS network bus wiring for multi-panel installations
• Auxiliary I/O, relay and conventional zone module wiring
• Cable specifications and BS 5839-1 compliance notes

Who should use this manual

This manual is for fire alarm installers doing the physical install of a Syncro AS panel. After install, the Product Manual and Loop Explorer PC tool cover the programming and configuration phase.

Related Kentec manuals

See the full Syncro AS section and the ASM Products Manual for module expansion.

Kentec Syncro installer training

For structured installer training on Kentec, see the Kentec fire alarm course.