Description

Silent Knight IntelliKnight 5600 / 5600C / 5600HV Installation & Operation Manual

The IntelliKnight 5600 series Installation & Operation Manual is the official Silent Knight reference for the 5600 addressable fire alarm panel range. This manual covers three variants: the standard 5600, the 5600C (Canadian-listed), and the 5600HV (high-voltage variant for industrial environments).

What the manual covers

• Cabinet mounting, AC mains wiring, earthing
• Battery sizing for 24h standby + 5-min alarm (NFPA 72)
• SLC loop topology with line isolators
• Silent Knight addressable device wiring
• Sounder and beacon notification appliance circuit (NAC) wiring
• Auxiliary I/O and relay output configuration
• Front-panel programming workflow
• Cause-and-effect logic for the 5600 platform
• Walk test, fault diagnostics, NFPA 72 commissioning sign-off
• Variant-specific notes for 5600C (Canada) and 5600HV (industrial)

Who should use this manual

This manual is for fire alarm installers and commissioning engineers deploying IntelliKnight 5600 series panels. The 5600HV variant in particular requires care during commissioning due to the higher voltage operation in industrial environments.

5600 variant differences

The 5600 is the standard variant for general US commercial installations. The 5600C is the ULC-listed variant for Canadian installations. The 5600HV provides higher-voltage operation for industrial sites where standard panel power supplies are inadequate.

Related Silent Knight manuals

For larger IntelliKnight platforms, see the IntelliKnight 5700, 5808 or 5820XL manuals. For the wider library, see the Silent Knight section.

Related fire alarm training

BH Courses do not currently run a Silent Knight-specific course, but the SLC architecture is shared with Notifier. For structured training on the equivalent SLC technology, see the Notifier Fire Alarm Training programme. For broader fire alarm fundamentals, see the Fire Alarm Training Course.