Description

Advanced MxPro 5 Commissioning Manual

The MxPro 5 Commissioning Manual is the official Advanced Electronics reference for setting up the MxPro 5 addressable fire alarm panel from first power-on through to handover. It covers the full programming and networking workflow needed to deliver an EN 54 compliant installation.

What the manual covers

• First power-on, panel discovery and initial menu navigation
• Loop addressing across all four supported protocols — Apollo, Hochiki, Argus Vega and Nittan
• Zone configuration and labelling, up to 256 zones per panel
• Cause-and-effect programming using DynamixTools PC software
• Network topology setup — fault-tolerant fibre (FT) and copper (NC) modes
• AlarmCalm false alarm reduction setup with verification timers and zone filters
• Voice evacuation integration with LifeLine modules
• TouchControl repeater commissioning
• Battery sizing calculations for 24h standby + 30 min alarm operation
• Walk test procedures and commissioning sign-off documentation
• Fault-finding workflows for loop, network, power supply and earth fault errors

Who should use this manual

This manual is for fire alarm commissioning engineers working on new MxPro 5 installations or significant modifications to existing systems. It assumes familiarity with addressable fire alarm system principles and the EN 54 / BS 5839-1 commissioning framework. End-users should refer to the MxPro 5 User Manual instead.

DynamixTools PC software

Most cause-and-effect programming for MxPro 5 is done offline in DynamixTools and uploaded to the panel via USB. The commissioning manual covers the programming workflow but assumes you already have DynamixTools installed and licensed.

Related Advanced manuals

For day-to-day panel operation, see the MxPro 5 user manual. For the legacy platform, see the MxPro 4 technical manual.

MxPro 5 fire panel training

If you want hands-on, structured commissioning training to complement this manual, BH Courses run a dedicated Advanced MxPro fire panel training programme. The course includes real-panel walkthroughs, DynamixTools demonstrations, FT/NC network setup exercises and cause-and-effect programming workshops. It is the fastest way to add MxPro 5 to your certified panel list.